Fibaro Heat Controller Radiator Thermostat

Parameters:

With parameters you can change the sensor itself. Such as the update time and sensitivity of the motion sensor. Most controllers have this baked in by default.

1. Override schedule time

This parameter overrides the schedule duration when you turn the knob.

Default value: 240
Available settings: 10-10000 (minutes)

2. Additional Features

This parameter is used to set the additional features.

Default value: 1
Available settings:
1 (bit 0) – enable open window detection
2 (bit 1) – quickly turn on window open detection
4 (bit 2) – increase tap accessibility (shorten battery life)
8 (bit 3) – turn on the LED if you control it remotely.
16 (bit 4) – secure if you turn full on or off via the button.