Fibaro Walli Dimmer

Frequently Asked Questions:

Can I continue to use my own switching material (is it compatible)?

Yes, but you do need a special frame for this. The following system are compatible:

- GIRA - System 55
- Legrand
- Schneider - Odance

Do I need a blue (N) wire to connect it?

No, you can also connect it without it

What is the maximum power to be connected?

That's 350W.

Can you turn off the LED of the Walli?

Yes, this is possible via parameter 13.

What is the minimum installation depth?

More than 40mm is recommended

What kind of lamps can I connect?

You can connect halogen, incandescent and LED lamps.

My lamp flickers when I turn it on. What can I do about it?

The obvious option is to try a different lamp, but you can also buy a bypass filter, which helps to get the minimum wattage level high.

Which protocol does this dimmer support?

The Z-wave Plus protocol is supported.

I am not getting the dimmer added, what am I doing wrong?

Make sure the dimmer is close to your controller and quickly press the button 3x in succession. If you do this too slowly, adding will not be activated.