Review:
INNR Smart Candle Colour
Installation on the INNR Bridge:
The first controller on which we are going to install this lamp is the Bridge from INNR itself. This should of course not cause any problems. To add the lamp, we start the INNR APP and press the plus sign at the top right and press 'add devices'. Now we scan the QR code on the side of the lamp. After this we provide the lamp with power, it will then change color. After a few seconds the lamp is found and I see a short blink to confirm that the lamp has been found and we see it appear in the APP.
Just as it should be.
Installation screens:
Configuration:
Control:
You get an on/off switch, you can dim, change the colors of the RGB LED and you can make the white LED warmer or colder.
Example routine:
As a routine we make sure that when we wake up the lamp is switched on.
Table of content
;
;