INNR Smart Filament Bulb vintage (RF-261/RF-264)

Installation via the ZipaTile/ZipaBox with Zigbee

Now that we have successfully tested the lamp with a few different controllers, we are going to connect it to the ZipaBox / ZipaTile. These smart home controllers use the Zigbee protocol, so adding them shouldn't cause too much trouble.

We first log in to the ZipaBox and go to our devices and press "add device". After this we make the choice for Zigbee and turn the lamp on / off 6 times. It is then found by the ZipaBox, the lamp indicates this by a short flash.

Unfortunately I cannot operate it. As a result, the lamp cannot be used.