INNR Smart Outdoor Pedestal Light Colour

Installation on Zipato/Zipatile:

We are also going to test this lamp with the ZipaTile/ZipaBox from Zipato. This hub has support for the Zigbee protocol, so adding it shouldn't cause too much trouble. We log into the ZipaBox first and go to our devices.

We then click on Zigbee and see the countdown begin. To add the lamp, we turn the lamps on and off. The LED will flash to indicate that the addition was successful. This is also the case because I see in the Zipabox that it has been found. If he does not find it yet, you have to switch the lamp on/ off 6 times.

When we go to our devices, we don't see it. That does not bode well. If we look at the configuration, we see that no type is linked to the lamps. Unfortunately, only Zipato can handle this so we cannot use this device.