Qubino Luxy Smart Light

Parameters:

1) Digital input
Default setting: 0
Available setting: 0 (Push button), 1 (Toggle Switch (on / off)), 2 (Motion sensor), 3 (Motion sensor with timer)

2) Alarm off (time)
Default setting: 1
Available setting: 0 (Only by z-wave command), 1 (By Z-Wave command or input)

5) Motion sensor timer
Default setting: 10
Available settings: 0 - 32534 sec, 32535 ​​(off)

10) Auto off (LED)
Default settings: 0
Available settings: 0 (off), 30 - 32535 ​​= 30 - 32535 ​​seconds (after power on)

11) Auto on (LED)
Default settings: 0
Available settings: 0 (off), 30 - 32535 ​​= 30 - 32535 ​​seconds (after turned off)

12) Auto off (Relay)
Default settings: 0
Available settings: 0 (off), 30 - 32535 ​​= 30 - 32535 ​​seconds (after power on)

13) Auto on (Relay)
Default settings: 0
Available settings: 0 (off), 30 - 32535 ​​= 30 - 32535 ​​seconds (after turned off)

30) Memorize status after power failure
Default setting: 2
Available setting: 0 (Turn off), 1 (Turn on)

50) Beeper/Alarm off/on
Default settings: 0
Available settings: 0 (off), 1 (on)