Xiaomi Aqara Temperature Humidity Sensor

Installation via the Xiaomi Gateway / Mi Home:

To start adding, log in via the APP and go to the device section. Then click on "Add child device" and search for the sensor.

You can start the addition by 5 sec. hold down the button on the side. The LED on the front will blink 3x if the addition is successful. He was of course found neat. I see a temperature, humidity and air pressure appear. Apparently this sensor can therefore also measure the air pressure. The values come in quickly. As a test I held my hands around the sensor for a moment and you can see the temperature rise almost immediately.

Example scene:

I don't have that many sensors in my gateway, so giving a good example is a bit tricky. To still leave the possibilities, I make sure that if the temperature exceeds 21 degrees, the lamp of the gateway is switched on.