Review:
RobbSmarrt Rotary dimmer Z-Wave 2-wire
Frequently Asked Questions
What is the installation depth of this dimmer?
Minimum 40mm
Do I need a blue wire?
You can connect this dimmer with or without a blue wire (2 wire or 3 wire)
What kind of lamps can I connect?
You can connect halogen, incandescent and LED lamps.
What is the maximum power to be connected?
A maximum of 600W can be connected if you use an incandescent lamp and a maximum of 300W with an LED/halogen lamp
I can't get the lamp added?
Make sure it is close to the controller and be patient. Sometimes you have to try a few times. What also sometimes helps is to exclude via your controller.
My lamp flickers when I turn it on. What can I do about it?
The obvious option is to try a different lamp but you can also buy a bypass filter which helps to raise the minimum wattage level.
Which protocol does this dimmer support?
The Z-wave Plus protocol is supported. There is also a Zigbee variant on the market.
Table of content
- Intro
- Homey
- Zipato (ZipaTile/ZipaBox)
- Fibaro Home Center 2
- Vera (Plus/Edge)
- Domoticz
- Conclusion Domoticz: This dimmer works fine. As usual with Domoticz, it is a bit of a search to determine which endpoints you have to switch on to make the right devices visible.
- Parameters
- Competition
- Frequently Asked Questions
- Lamp test
- Conclusion
